New
2012 Avia 36 Custom Aluminum Cruiser
Length: 11.70 m (38’ 5”)
Builder: Avia Design Group / Jim McIntyre
Engine: Cummins QSB 5.9-425 HO Diesel
Location: Port Colborne, Ontario
Vessel Overview
“CAPERS” is a custom-built, aluminum 11.7m (38') pleasure craft power yacht designed by Grahame Shannon of Avia Design Group and built by Jim McIntyre in Port Colborne, Ontario. Professionally surveyed by Coastwise Management Inc. in 2025, the vessel was found in GOOD overall condition.
Constructed with marine-grade welded aluminum and heavy structural framing, this vessel offers robust performance with a quality finish inside and out. Hull plating thickness includes ¼” shell, 3/8” deck, and ½” in the engine frame areas.
Key Features
Hull Construction: Welded aluminum throughout; consistent with ABYC hull and machinery standards.
Design: Raked bow, square stern, single hard chine, moderate deadrise.
Deck & Superstructure: Coated in white epoxy with excellent coverage; non-slip grip deck covering; swim platform.
Interior: Finished in polished mahogany decking, cabinetry, and trim.
Propulsion & Performance
Main Engine: Cummins Diesel QSB5.9-425 HO
Manufactured: August 31, 2006
Transmission: ZF 280-1A
Surface Drive: Arneson ASD10 B 113 with 27” Nibrial Propeller
Trim Tabs: Dual 18” x 12” hydraulic
Steering: Hydraulic with single helm station
Generator: Northern Lights Diesel, 7.36 kW, 30 Amp, 74 hrs
Bow Thruster: 13hp Hydraulic
Electrical System
12/120V, 50 Amp service
Victron Energy charger/inverter
Shore power with full breaker protection and volt/amp meters
Marine-approved wiring throughout
Tankage
Fuel: 1,200 litres (midship center)
Fresh Water: 235L port + 235L starboard
Holding Tank: 130L with 18L vacuum tank
Grey Water: 95L forward + 156L aft
Water Heater: Force 10, 11 gallons, 1500W
Comfort & Safety
Air Conditioning: Ocean Breeze OB18CH, 18,500 BTU
Navigation: Raymarine hybrid touch chart/radar, Autohelm, ICOM VHF, GPS
Safety Equipment: Fire extinguishers, lifejackets, flare kit, first aid kits, navigation lights
Anchor System: Muir windlass with 35 lb. plow anchor
Length: 11.70 m (38’ 5”)
Builder: Avia Design Group / Jim McIntyre
Engine: Cummins QSB 5.9-425 HO Diesel
Location: Port Colborne, Ontario
Vessel Overview
“CAPERS” is a custom-built, aluminum 11.7m (38') pleasure craft power yacht designed by Grahame Shannon of Avia Design Group and built by Jim McIntyre in Port Colborne, Ontario. Professionally surveyed by Coastwise Management Inc. in 2025, the vessel was found in GOOD overall condition.
Constructed with marine-grade welded aluminum and heavy structural framing, this vessel offers robust performance with a quality finish inside and out. Hull plating thickness includes ¼” shell, 3/8” deck, and ½” in the engine frame areas.
Key Features
Hull Construction: Welded aluminum throughout; consistent with ABYC hull and machinery standards.
Design: Raked bow, square stern, single hard chine, moderate deadrise.
Deck & Superstructure: Coated in white epoxy with excellent coverage; non-slip grip deck covering; swim platform.
Interior: Finished in polished mahogany decking, cabinetry, and trim.
Propulsion & Performance
Main Engine: Cummins Diesel QSB5.9-425 HO
Manufactured: August 31, 2006
Transmission: ZF 280-1A
Surface Drive: Arneson ASD10 B 113 with 27” Nibrial Propeller
Trim Tabs: Dual 18” x 12” hydraulic
Steering: Hydraulic with single helm station
Generator: Northern Lights Diesel, 7.36 kW, 30 Amp, 74 hrs
Bow Thruster: 13hp Hydraulic
Electrical System
12/120V, 50 Amp service
Victron Energy charger/inverter
Shore power with full breaker protection and volt/amp meters
Marine-approved wiring throughout
Tankage
Fuel: 1,200 litres (midship center)
Fresh Water: 235L port + 235L starboard
Holding Tank: 130L with 18L vacuum tank
Grey Water: 95L forward + 156L aft
Water Heater: Force 10, 11 gallons, 1500W
Comfort & Safety
Air Conditioning: Ocean Breeze OB18CH, 18,500 BTU
Navigation: Raymarine hybrid touch chart/radar, Autohelm, ICOM VHF, GPS
Safety Equipment: Fire extinguishers, lifejackets, flare kit, first aid kits, navigation lights
Anchor System: Muir windlass with 35 lb. plow anchor
2012 Avia 36 Custom Aluminum Cruiser
2012 Avia 36 Custom Aluminum CruiserLength: 11.70 m (38’ 5”)Builder: Avia Design Group / Jim McIntyr... Read More
Asking Price
$199,999.00
- Stock: Available for Sale
- Brand: Avia
- Model: BROKERAGE-72836
- SKU: BROKERAGE-72836
Ask about this boat
Send us a note and we will follow up about this listing.
Our Special$39,900.00
Reduced Price$149,000.00 Asking Price$195,000.00
Asking Price$14,900.00
Tags:
Used Brokerage Boats
| Product Specifications | |
| Unit of Measure | Each |
| Used Boat Specs | |
| Length | 38.5 ft |
| Year | 2012 |
| Manufacture | Avia |
| Model | 36 Custom |